| 最新鈦及鈦合金AMS標準（二） |
| 寶雞市金海源鈦標準件制品有限公司 2021-01-28 16:34:19 文字大小:[大][中][小] |
AMS標準被譽為航空航天材料領域的“全球性標準”，適用于全球范圍內航空飛行器零件、系統的設計和生產以及政府采購，也是可供我國航空材料研制、生產和使用參照的重要材料標準。小編對2019.1~2020.9期間已經過復審確認或修訂的現行的與鈦及鈦合金材料、質量控制、工藝等相關的AMS標準進行了整理匯總，以便讀者在工作中及時更新查詢。 1.AMS7014-2019 Titanium Alloy, High Temperature Applications, Powder for Additive Manufacturing, Ti-6.0Al-2.0Sn-4.0Zr-2.0Mo 增材制造用Ti-6.0Al-2.0Sn-4.0Zr-2.0Mo高溫鈦合金粉末 This specification covers a heat-resistant titanium alloy in the form of pre-alloyed powder. 2.AMS7004-2019 Titanium Alloy Preforms from Plasma Arc Directed Energy Deposition Additive Manufacturing on Substrate Ti-6Al-4V Stress Relieved 等離子弧定向能量沉積增材制造成形Ti-6Al-4V合金預成形體(去應力態) This specification covers preforms fabricated up through 5.5 inches (140 mm) inclusive in deposition width thickness(see 8.2.5) using a Plasma Arc Directed Energy Deposition(PA-DED) additive manufacturing process on a Ti-6Al-4V substrate that are subjected to post-deposition stress relief heat treatment.This is a wire fed additive manufacturing process. If required by the CEO,preforms may require subsequent machining to meet requirements for their intended final part application. 3.AMS4919J-2019 Titanium Alloy Sheet, Strip, and Plate 6Al-2Sn-4Zr-2Mo-0.08Si Duplex Annealed 雙重退火Ti-6Al-2Sn-4Zr-2Mo-0.08Si合金薄板、帶材及板材 This specification covers a titanium alloy in the form of sheet, strip, and plate 0.025 to 3.000 inches(0.64 to 76.20 mm), inclusive, in nominal thickness. 4.AMS6947B-2019 Titanium Alloy, Bars, Wire, Forgings, Rings,and Drawn Shapes 4Al-2.5V-1.5Fe Annealed, Heat Treatable 可熱處理的退火態Ti-4Al-2.5V-1.5Fe合金棒材、絲材、鍛件、環件及拉拔型材 This specification covers a titanium alloy in the form of bars, wire, forgings,flash welded rings, drawn shapes 4.000 inches(101.60 mm) and under, and stock for forging, heading, or flash welded rings of any size. 5.AMS6907C-2020 Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al-2.0Sn-4.0Zr-6.0Mo Duplex Annealed 雙重退火Ti-6.0Al-2.0Sn-4.0Zr-6.0Mo合金棒材、鍛件及鍛坯 This specification covers a titanium alloy in the form of bars, forgings up through 4.000 inches(101.60 mm), inclusive in nominal diameter or least distance between parallel sides and 32 square inches (206.46 cm2) maximum cross sectional area, and stock for forging of any size. 6.AMS6907C-2020 Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al-2.0Sn-4.0Zr-6.0Mo Duplex Annealed 雙重退火Ti-6.0Al-2.0Sn-4.0Zr-6.0Mo合金棒材、鍛件及鍛坯 This specification covers a titanium alloy in the form of bars, forgings up through 4.000 inches(101.60 mm), inclusive in nominal diameter or least distance between parallel sides and 32 square inches (206.46 cm2) maximum cross sectional area, and stock for forging of any size. 7.AMS6906C-2019 Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al-2.0Sn-4.0Zr-6.0Mo Solution Heat Treated and Aged 固溶時效態Ti-6.0Al-2.0Sn-4.0Zr-6.0Mo合金棒材、鍛件及鍛坯 This specification covers a titanium alloy in the form of bars up through 4.000 inches(101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches(101.60 mm), inclusive, and stock for forging of any size (see 8.7). 8.AMS6920D-2019 Titanium Alloy Bars, Forgings and Forging Stock 3Al-8V-6Cr-4Mo-4Zr Solution Heat Treated 固溶熱處理態Ti-3Al-8V-6Cr-4Mo-4Zr合金棒材、鍛件及鍛坯 This specification covers a titanium alloy in the form of bars up through 4.000 inches(101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches(101.60 mm), inclusive, and stock for forging of any size(see 8.6). 9.AMS6926C-2019 Titanium Alloy Bars, Forgings and Forging Stock 13V-11Cr-3Al Solution Heat Treated and Aged 固溶時效態Ti-13V-11Cr-3Al合金棒材、鍛件及鍛坯 This specification covers a titanium alloy in the form of bars up through 4.000 inches(101.60 mm) inclusive, in nominal diameter or least distance between parallel sides, forgings of thickness up through 4.000 inches(101.60 mm), inclusive, and stock for forging of any size (see 8.6). 10.AMS4926P-2019 Titanium Alloy, Bars, Wire, and Rings 5Al-2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength 退火態、屈服強度110 ksi（758 MPa） Ti-5Al-2.5Sn合金棒材、絲材及環件 This specification covers a titanium alloy in the form of bars, wire, flash welded rings 4.000 inches(101.60 mm) and under in nominal diameter or least distance between parallel sides and 16 in2(103 cm2) and under in cross-sectional area, and stock of any size for flash welded rings. 11.AMS4931G-2019 Titanium Alloy Bars, Forgings, and Rings 6Al-4V Extra Low Interstitial(ELI) Duplex Annealed, Fracture Toughness 超低間隙雙退火態Ti-6Al-4V合金棒材、鍛件和環件 This specification covers a titanium alloy in the form of bars 6.000 inches (152.40 mm) and under in nominal diameter or least distance between parallel sides, forgings and flash welded rings 6.000 inches (152.40 mm) and under in thickness, and stock for forging and stock for flash welded rings of any size. 12.AMS6935C-2019 Titanium Alloy Bars, Forgings and Forging Stock 6.0Al–6.0V–2.0Sn Solution Heat Treated and Aged 固溶時效態Ti-6.0Al–6.0V–2.0Sn合金棒材、鍛件和鍛坯 This specification covers a titanium alloy in the form of bars up through 4.000 inches(101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches(101.60 mm), inclusive, with barsand forgings having a maximum cross-sectional area of 32 in2(204.46 cm2), and stock for forging of any size(see 8.7). |
